Making the double

By popular demand, some info and picks about making the double kayak.

I started by ordering plans for the Chesapeake Double, but was advised that it was really a lake tourer for 'Fat Americans' - stereotype or tautology depending on your point of view, and that I should consider the Sport Tandem instead.
Unfortunately, the plans revealed that this was too long to fit in the workshop, and so with some trepidation, I decided to have a go at adapting a design in 'The New Kayak Shop' by Chris Kulczycki. Essentially it is a cut and shut design, stretching a Chesapeake by adding about 18 inches of length to the mid-section, while (hopefully) retaining the proven lines. This left some anxiety about exactly where to place the cockpits, and how to arrange the deck line such that the forward paddler was not 'swamped' - hence the 'step'.

Construction pictures:

The stealth boat

I have been cheering up the 'teach yourself boat-building boat' which looked rather sorry for itself in comparison to the double.
The boat is built from plans for the Chesapeake 16 LT (Light Tourer) from Fyne Boat Kits, very cheap ply, and various scraps of wood that were laying around.
After the first round of construction it looked like this.
Once Catherine paddled it on a reasonable trip (20k), it deserved a make-over, and now looks a little better, if somewhat fishy. Note the sophisticated deck hatch made from a BDH bottle embedded in foam, improved cockpit rim, footrests, etc.





The question now is - what to build next?
and who for?