Anglesey Boat

I strongly recommend applying at least one coat of un-thinned epoxy to all of the plywood surfaces inside and outside the canoe. The officia...

The day following the glassing of the bottom exterior of the hull I turned the canoe over and prepared to glass the inside. First, I gave th...

After fitting the inwales and outwales I took the time to give the canoe hull an initial rub down. I concentrated on where I had filled the ...

Just a couple of pics to prove that the prototype floats.

I have been working on a kayak loader as we are trying to manage with only one vehicle. I like the general idea of the Kari-Tek Easy Load b...

Boat building and paddle making carry on in the background, but last week we were contacted by Nigel Dennis to see if we could make some h...

My newest cordless drill/driver has got to the point where you have to put the battery on charge whenever you put it down - which means you ...